Email: sales@swet-boiler.com                   Tel: 0086 18736903078
You are here: Home / Products / Oil/gas boiler / WNS 2.8MW oil gas fired hot water boiler

Hot Products

More >>

loading

Share to:
sharethis sharing button

WNS 2.8MW oil gas fired hot water boiler

WNS series hot water boiler adopts the most sophisticated three returns all wet back structure,thread smoke tube structure weld joint with high quality.

Reasonable boiler combustor design, suitable for different fuels such as diesel, natural gas, town gas and mazout, the fuels can burn completely and increasing the radiation heating furnace area,reducing the NOX emissions.

100% corrugated furnace and spirally corrugated tube, can absorb flame heat effectively, thermal efficiency can be more than 96%.
  • WNS2.8

  • swet

  • WNS2.8

  • 2.8MW

  • 0.7(1.0)(1.25)Mpa

  • 95(115)℃

  • 20℃

  • 95.85%

  • 284.38Kg/h

  • 325Nm³/h

  • 4660*2340*2430mm

   This series boiler is three return fire tube steam boiler.It equipped with good performance burner and advanced techniques.The burning control,water feed,programs run,etc,is full automatic.This fantasy boiler is safe and reliable,and also has the advantage of compact structure,simple operation,easy installation,high efficiency,less pollution and noise,etc.
 
   The series boiler is three-return fire tube hot water boiler. 
 
   Atmosphere through three-return smoke tube, smoke chamber.
 
   It equipped with good performance burner and advanced techniques
 
   Simple operation, easy installation, high efficiency, less pollution and noise, etc
 
   It is widely used for factory, hotel, hospital, office building, etc

new hot water boiler
1. The main body is a three-way pyrotechnic tube structure with a full-wet, back-back flow in the shell. The flame is combusted in a large combustion chamber with a slight positive pressure to fully expand and the combustion heat load is low. NOx emissions from hazardous substances are low.
 
2, waveform furnace and thread tobacco structure, both to improve the strength, but also to meet the needs of various parts of the thermal expansion.
 
3. The main welds are welded using butt joints and are free from damage detection by X-rays and ultrasonics to ensure that the welding quality meets the national requirements.
 
4, boiler water capacity, ability to adapt to load. A well-designed pot device ensures that the steam rate is less than 4% and meets the higher steam quality requirements of users.
 
5. It adopts a new type of heat insulation material, which has light weight, low heat loss, and good heat insulation performance.
 
6, water level alarm using stainless steel electrode rod, PTFE for insulation material. Inserted from above, it is not easy to hang dirt, reliable performance and long service life.
 
7, front and rear smoke boxes for hinge connection, can be easily opened, maintenance and convenient and quick.
 
8. Oxygen content adjustment (optional): The system can successfully detect the oxygen content in the flue gas, and transmit the data to the control system in real time. Through intelligent computer analysis, the proportion of combustion equipment is automatically adjusted to make it real-time. Being in the best working condition, the combustion efficiency is greatly improved, which can greatly reduce the fuel consumption.

lpg steam boiler
 
9, automatic control level lead
Model Unit WNS2.8
Rated capacity MW 2.8
Working pressure Mpa 0.7(1.0)(1.25)
Steam temperature 95(115)
Feed temperature 20
Testing efficiency 95.85
Diesel consumption   Kg/h 284.38 
 Gas consumption  Nm³/h 325
Outline dimension mm(L*W*H) 4660*2340*2430








wood boiler
Product Inquiry
If You Are Interested In Our Products Please Click on the Consultation !
Contact Us
 Email: sales@swet-boiler.com
  Tel: 0086 18736903078
  Add: 8th Western Ring Road, Kaifeng City, Henan Province
Copyright @ Henan Swet Boiler Co., LTD. All Rights Reserved
Technical Support: Coverweb
Leave a Message
Product Inquiry